Lettering First Attempt

[Titan-Ink]

I think i ruined it with the shading, The problem was using a 5mag in an open ended tip on a stealth rotary machine.

I outlined with a 3RL and then switched (after the mag) to a 9RS
I will have another go in the week

 

[skinpix]

The lettering looks good :clap:the shading is much to dark...always start with a light shade,you can always darken it if it needs it...just as well its on practice skin.:thumbsup:

 

[jamesb]

looks good :thumbsup: yea start with light shades 1st nice 1 tho :clap:

 

[Titan-Ink]

I will put that advice into action. I take it you dilute the black with distilled water? or would you introduce some white into the black??

 

[jamesb]

I will put that advice into action. I take it you dilute the black with distilled water? or would you introduce some white into the black??

you could use diss water or whitch hazel from the chemist

 

[oultimer]

Could you use tap water to dilute if it is only on practice skin?

 

[jamesb]

Could you use tap water to dilute if it is only on practice skin?

yes i mite get some stick for that but only if it is on piggy but whitch hazel is only about *£1.20 a bottle from the chemist an it lasts aaaages lol :thumbsup:

 

[WilD]

Hi,
the lettering looks great - but as others already said, bit tooooo heavy on the shading! kuro sumi mid grey wash for shading is lovely and a big ish bottle only about *£15 - saves all the mixing too!